Changes for ARM 7.3.2 released May 15, 2006

General

• New Tutorial menu choices to the Help menu in ARM and ARM ST.
• Added support for limit checking plot data for new EPPO taint assessment.  Enter ARM Action Code of Y to apply this limit check for GDMDEF study definitions, and also for any customized study definitions that use the default ARM 7 ARM Action Code limit checks.
• Corrected a problem that ARM displayed a duplicate file message when saving a trial DAT file opened from an email message.

Study Definitions and Related Files

• Enhanced the default Rating Shell by adding Plot Data Header fields: Pest and Crop Name, Crop Variety, Crop Description, Collection Basis/Unit, Sample Size/Unit, Crop Stage Scale, Density/Unit fields and Application fields: Applied By, Wind Direction, Pressure Unit, Nozzle Calibration/Unit and Mix Size/Unit.
• Increased default length of Treatment Name field from 25 to 30 for G-All7.def study definition in a new ARM installation.
• Increased default length of Other Rate Unit field from 17 to 25 for G-All7.def study definition in a new ARM installation.
• Added an automatic conversion of treatment spray volume unit LHAMCH that is used by one global client to GDM unit L/HA/M CH.
• Removed duplicate entries from GDM Application Timing validation list G-AppTim.Lst.
• Corrected a problem with Korean character placement in the Site/Protocol and Plot Data Header.
• Added the following visible rate units to ARM 7 GDMDef rate unit table and Other Rate Unit validation list:
  KG A/A = Kilograms Active Ingredient per Acre
  MG/A = Milligrams Product per Acre
  MG/HA = Milligrams Product per Hectare
  G/1000 FT2 = Grams Dry Product per 1000 Square Feet
  GAL/10 FT2 = Gallons Product per 10 Square Feet
  L/M2 = Liters Product per Square Meter
  LB/1000 FT = Pounds Product per 1000 Feet of Row
  KG/100 ROW-M = Kilograms Product per 100 Meters of Row
  GAL/10 LINEAR FT = Gallons Product per 10 Linear Feet
  L/M = Liters Product per Linear Meter
  MG AE/L = Milligrams Acid Equivalent per Liter Mix
  MG/L = Milligrams Product per Liter Mix
  LB A/YD3 = Pounds Active Ingredient per Cubic Yard
  KG A/M3 = Kilograms Active Ingredient per Cubic Meter
  LB A/CWT = Pounds Active Ingredient per Hundredweight Seed
  KG A/100 KG = Kilograms Active Ingredient per 100 Kilograms Seed
• Made visible the following rate units that were previously hidden:
  L/TON = Liters Product per Tonne Seed
  LB/TON = Pounds Dry Product per Ton Seed
  KG/TON = Kilograms Dry Product per Tonne Seed
  QT/TON = Quarts Product per Ton Seed
• Made the following hidden rate units calculating rate units for product amount calculations:
  OZ AI/PLANT = Ounces Active Ingredient per Plant
  G AI/PLANT = Grams Active Ingredient per Plant
  OZ PR/PLANT = Ounces Dry Product per Plant
  G PR/PLANT = Grams Product per Plant
• Added the following as hidden rate units, so these units are only supported for free-form entry into Other Rate Unit (they are not included in the validation list):
  G A/10000 M2 LWA = Grams Active Ingredient per 10000 Square Meters Leaf Wall Area
  KG A/10000 M2 LWA = Kilograms Active Ingredient per 10000 Square Meters Leaf Wall Area
  KG/10000 M2 LWA = Kilograms Dry Product per 10000 Square Meters Leaf Wall Area
  L/10000 M2 LWA = Liters Product per 10000 Square Meters Leaf Wall Area
  G PR/MOUND = Grams Product per Mound
  G A/MOUND = Grams Active Ingredient per Mound
  G AI/1000 FT = Grams Active Ingredient per 1000 Feet of Row
  G AI/100 ROW-M = Grams Active Ingredient per 100 Meters of Row
  MG AI/HOLE = Milligrams Active Ingredient per Hole
  MG PR/HOLE = Milligrams Product per Hole
  QT PR/100 FT2 = Quarts Product per 100 Square Feet
  L PR/100 M2 = Liters Product per 100 Square Meters
  PPK AI = Parts Per Thousand Active Ingredient
  QT AI/A = Quarts Active Ingredient per Acre
  L AI/HA = Liters Active Ingredient per Hectare
  LB AI/FT2 = Pounds Active Ingredient per Square Foot
  KG AI/M2 = Kilograms Active Ingredient per Square Meter
  GAL/TREE = Gallons Product per Tree
  L/TREE = Liters Product per Tree

Reports

• Corrected issue with Data Collection report where too many columns were printed to Word when the blank columns option was selected.
• Fixed problem that numbers with comma as decimal symbol did not transfer correctly to the Excel report link template (when Windows decimal symbol is a comma).

Changes in Previous ARM Versions

Select previous ARM 7 versions for a list of changes in older ARM versions.